0
<-- nev left start -->

UPVC ASTM Plumbing Systems Solvent Joint

UPVC ASTM Plumbing Systems Solvent Joint
UPVC ASTM Plumbing Systems Solvent Joint
Price And Quantity
  • 100
  • Piece/Pieces,
  • 1000 INR
Product Specifications
  • Other
  • Other
  • Round
  • ASTM
  • Round
  • WHITE
    Product Description

    ASTM Plumbing Systems Solvent Weld

    Specifications

    Material
    Unplasticized PVC - U.V. Stabilized.
    Colour
    Ivory
    Standards
    Pipes - Schedule 40 and 80 AS per ASTM D - 1785 (Plain ended)
    Fittings - Schedule 80 - As per ASTM D - 2467
    Working Temperature
    Up to 60 C - Continuous
    Up to 90 C - Short time up to 3 mins.
    Test
    Tested for potable water supply under guidelines of
    IS - 4985 for Pipes
    IS - 7834 - for Fittings


    Dimension and water pressure rating at 23 C for solvent weld pipes as per ASTM D-1785

    Nominal Bore
    Outside
    Diameter
    Schedule 40
    Schedule 80
    Wall
    Thickness
    Working
    Pressure
    Wall
    Thickness
    Working
    Pressure
    (Inch)
    (mm)
    (mm) kg/cm
    (mm) kg/cm
    1/2"
    21.34 +- 0.10
    2.77 + 0.51
    41.4
    3.73 + 0.51
    50.6
    3/4"
    26.67 +- 0.10
    2.87 + 0.51
    33.1
    3.91 + 0.51
    47.6
    1"
    33.40 +- 0.13
    3.38 + 0.51
    31.0
    4.55 + 0.53
    43.4
    11/4"
    42.16 +- 0.13
    3.56 + 0.51
    25.5
    4.85 + 0.58
    35.0
    1.1/2"
    48.26 +- 0.15
    3.68 + 0.51
    22.8
    5.08 + 0.51
    42.4
    2"
    60.32 +- 0.15
    3.01 + 0.51
    10.3
    5.54 + 0.66
    27.6


    Features and Benefits

    Light weight
    Easy to transport, store, handle and install, saves labour.
    Solvent cement joint
    Quick installation. Saves installation cost.
    Smooth Bore
    Ensures higher flow compared to G.I. pipeline of the same size. No clogging. Saves operational cost.
    Corrosion resistance
    Bore diameter remains constant, ensuring constant flow over lifetime.
    Low Maintenance
    Superior resistance to most of the chemicals, no scaling, makes the system almost maintenance free.
    Life
    More than 50 years.
    Cost effective
    Added value for your money

    Application
    • Water connections for buildings
    • Water distribution systems for bathrooms, washing places such as airports, bus station, railway station etc.
    Jointing Methods
    • Solvent cement joint
    • Cut the pipe of required length and clean the end
    • Chamfer the cut edge on the pipe for easy entry
    • Mark the depth of insertion on pipe end
    • Roughen the pipe insertion surface (externally) and socket of the fitting (internally) by using emery paper
    • Apply a thin coat of PVC solvent cement on the roughened surface with a brush. Avoid excess solvent cement
    • Insert the pipe end inside socket fitting fully and turn through 90' for even spreading of solvent cement. Hold the joint for about 3 minutes
    • Cure the joint for 24 hrs. for a proper and permanent joint.
    Note: PVC fittings with one side threads are available for jointing with other threaded pipes or fittings.

    For Thread Jointing
    • Clean the Male and Female threads
    • Apply Ptfe tape in the direction of the thread tightening
    • Hand tighten the threads firmly
    • Tighten the joint little more by using pipe wrench. Do not over tighten. Use rubber packing to avoid scratches on pipe.
    We are looking for queries from Mumbai, Navi Mumbai & Thane District only.
    Trade Information
    • Cheque, Cash in Advance (CID), Cash Advance (CA)
    • All India
      Contact Us

      Kasturi Complex, Gala No.K-1, Opp. Kanchan Compound, Anjur Road, Rahnal Village, Bhiwandi, Maharashtra, 421302, India
      Phone :+918045803084